Pyser PNP-MC Operator's Manual download pdf (Page 2)

LIMITED WARRANTY

The manufacturer of this

POCKET SCOPE, has provided a limited

warranty to the original purchaser. It was

attached to the manufacturer’s terms and

conditions of sale.

WARNING

This product contains an image

intensifier tube.

Permanent damage to the tube may result if

the product is used in normal room

illumination or bright ambient light. Do not

direct it at a bright light source such as the

sun, street or vehicle lights or over an

extended period toward another bright light

source or stationary scene which could lead

to permanent damage to the image

intensifier tube.

PNP-M - Operator’s Manual 21

Chapter 5. Accessorie Mounting

5.3 PNP-MC with head mount / helmet

mount fitting guide

1. Attach monocular to the mount with

thumbscrew A

2. Depress plunger B to lift monocular

into the vertical position (where it will

automatically shut off)

3. Adjust pitch setting of the monocular

with thumbscrew C

4. Adjust height setting of the monocular

with thumbscrew D

5. Adjust lateral setting of the monocular

with thumbscrew E

6. Adjust forward/backward setting of the

monocular with thumbscrew F

7. For rapid removal of the monocular,

fully loosen thumbscrew F, depress

plunger G and slide the assembly off

its mounting slide away from the face.

8. For safe stowage, press the lens cap,

when not in use, onto pin H.

9. For fine adjustment of pitch slacken

screws J move monocular to desired

attitude and re-tighten screws.

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments